top of page

Reds Racing 220A 1-8 ESC

We are thrilled to announce the release of Reds Racing Z8 PRO GEN3 ESC. The new 220A ESC came into existence with the notion that we can create the best ESC there is. We never stop looking at what is possible in determining how to achieve high performance and reliability. Therefore, a new platform was created. The ESC was designed based on driver feedback, years of testing, the demands of racing and making sure that there were no compromises. The New ESC features a new Built-In Communication Protocol for quick setup of parameters, firmware upgrades since we recently developed REDS Racing iOS and Android App. After downloading Reds App and connecting REDS ESC to your phone you can control your ESC (Throttle, Power, Voltage, Current, Temperature, RPM, Timing…) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. You can say goodbye to old devices such as program cards and so on. Main Features:

  • 1:8 Scale Buggy,Truggy, GT and On Road

  • 2-4 Cell LiPo / 220 Amp

  • Built in Communication Protocol allows programming via Apple or Android App

  • 32 Bit high performance CPU

  • Ultra-Low Resistance FET Board

  • BEC Output: 6.0V , 7.4V , @6A

  • Sensored: Yes (Sensorless not recommended)

  • Motor Limit: 3000 KV @ 4S LiPo

  • Dimensions LxWxH: 55x40x37 mm


1 Comment

I would need an explanation of the parameters referring to the esc reds z8 pro 220a 1/8 gen3, I'm not an expert

Popular Posts
Search By Tags
bottom of page