Nitro Off Road Engines
REDS 2143 in combination with M manifold increases runtime of about 30-40 seconds depending on the track and surface grip. Enjoy up to nine minutes of run time or more per tank with 721 Scuderia engine and Tetra clutch system. The pipe guarantees an increase of torque up to 5%. It produces a precise throttle response in the low to mid RPM range, combine this with smooth and linear performance up to the high RPM range to produce a great power curve. We suggest to use this pipe with S line engines such as: 721 Scuderia, 721 Scuderia Gen2, 721 Superveloce and 721 Corsa.
Single Bend L, M, S or XS
REDS Racing manifolds have been designed for different track conditions and to optimize performance.
L (Long) manifold allows you to increase performance at low and medium RPM for a better feeling. It is recommended for high grip tracks, top speed will be lower.
M (Medium) is recommended for medium grip tracks where more bottom torque is required, top speed will be slightly lower.
S (Short) is recommended for medium or low grip tracks; it is a good compromise between torque and top speed.
XS (Extra Short) is recommended for low grip traction to achieve the highest top speed but lower bottom torque.
Turbo Special Glow Plugs
Japanese style plug
The most technologically advanced glow plugs on the market.
TS3 and TS4 are Japanese style glow plugs suitable for every engine brand and specific for different temperatures. This plug is the choise of many customers and REDS Team driver like Elliott Boots, Juan Carlos Canas, Kyle McBride, Cole Ogden and many others.
TS3 - 0-25°C
TS4 - 20-40°C
High Density Foam
After several months of testing in different conditions we are glad to release Reds Racing High Density Air filters. Reds High density filters have been developed for many popular 1/8 Off-Road Buggies and Truggies and offer improved engine life and performance compared to standard filters.
The filters are made from a special foam and are precision cut to ensure a perfect fit. The filters feature increased mass for improved airflow and better dust protection and come in a set of 10 air filter.
We advise to use these filters only with Reds Racing Air filter oil.
TETRA CLUTCH SYSTEM
Adjustable - Pre Assembled - 100% made in Italy
REDS Racing offroad clutch system has been developed to make the engine power output more linear and smoother. The REDS clutch is guaranteed to provide the best traction, vehicle driveability and low fuel consumption. REDS clutch system is completely adjustable. You can choose different combinations of spring diameters, clutch shoes and flywheels. REDS clutch system is 100% made in Italy and comes pre-assembled to guarantee the best performance and reliability.
Long-Wear Clutch Bell
Describe your image here
Describe your image here
Reds Racing New Clutch Bell Gen 2 line has been specifically designed to improve teeth, compared to the previous version, to make them perfect for every type of car.
The new 1 mm module long wear clutch bell is made of high quality steel and the special coating treatment allows the teeth to last longer than any other standard clutch bell on the market, transferring power from the clutch to the center spur gear and the rest of the drivetrain with more efficiency and reliability. Furthermore,The special surface treatment increases surface quality and wear resistance.
A special vented design also guarantees lower temperatures and more clean shoes engagement for a longer life of both bell and clutch shoes.
Durabell clutch bell is available in 13,14,15,16, 17 and 18 teeth version and it is suitable for Kyosho, Sworkz, Mugen, Losi, Tekno, JQ, Xray, Associated, Hot Bodies, Serpent, Xray.
BEARINGS TOOL KIT
Professional Tool for Engine Maintenance
The new Engine Bearing Tool kit is 100% Made in Italy. It has been improved with new materials to guarantee better quality and durability.
This new Kit includes a puller and a presser for pulling out and pressing in front & rear engine bearings. Reds Racing Engine Bearing Tool Kit was developed for racers that want to do maintenance to their nitro engines. The tool is available in two versions:
.12 engine tool for 7mm front and 12mm rear bearing Part # ENTL0002.
.21 engines tool with 7mm front and 14mm rear bearing Part # ENTL0001.
Bearing presser is made from high quality Hard Coated Spring Steel. Bearings surfaces are grinded for high precision bearing assembly.
The innovative rear bearing puller is made with Hard Coated Spring Steel and aluminium for unsurpassed durability. All parts are CNC-machined for ultra-high precision. The lightweight design and compact size make this tool easy and comfortable to use.
AIR FILTER OIL & AFTER RUN OIL
Extend the life of your engine
REDS Racing Air Filter Oil features a high-performance improved formula, specifically designed for foam air filters on off-road engines.
While maintaining the water repellent characteristic of the previous version, this new super tacky formula provides an even better protection from dirt and dust to the engine’s internal parts. Thus, it helps to extend the life of your engine. Reds Racing Filter Oil is blue in colour for easy application and comes in a 100ml bottle.
REDS Racing After Run Oil is a high-quality oil, carefully developed to provide maximum protection against engine corrosion when storing your engine for a long time.
It can be used on any nitro engine to prevent damage to engine bearings and internal parts such as piston,conrod and sleeve. Our After Run Oil comes in a 10ml bottle featuring a needle tip for easy and precise application.
Both Reds Racing New Air Filter Oil and After Run Oil are only available for the EU market.