Reds Racing is happy to announce that the new 721 SCUDERIA GEN2 engine is now available. Due to the success of 721 Scuderia GEN1 engine in recent competitions we have decided to maintain the main features unchanged and improve the carburetor with new materials to increase reliability. Furthermore, the new carb features a new double grab screw joint link to facilitate positioning and fitting with the servo link. To satisfy all our customers requests we have decided to release the new Scuderia Gen2 in 2 different color combinations (red or black) to match engines with any bodyshell.
REDS is always striving to innovate. This means investment into new core technologies. Drawing from the rich experience gained through competing on the worldÐ²€â„¢s best RC tracks with the best drivers in the world, our goal is to deliver quality products that are built with passion. The new S line does this.
The new 721 S Scuderia features high reliability, tuning stability and great fuel mileage. Combined with specific technical changes in the porting and new materials, this 7 port engine features higher power and better fuel efficiency compared to any REDS engine released from REDS.
During testing we found the new engine is able to provide more torque compared to our competitors, making it suitable for both Buggy and Truggy.
Over 9 minutes run time
The 721 S Scuderia has proved to guarantee over 9 minutes runtime in recent competitions and tests thanks to new materials and coatings.
The GEN2 engine features a new carburetor with new materials to increase reliability and tuning stability, in particular the insulator bushing has been improved with a higher strength material. Furthermore, it features a new double grab screw joint link to facilitate positioning and fitting with the servo link.
Category: 1/8 Buggy and Truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,24
Stroke [mm] 16,8
Inlet ports: 7
Outlet ports: 1
Crankshaft: balanced with low friction DLC Coating
Backplate: aluminum with low friction DLC Coating
Front ball bearing: 7x19x6 rubber seal made in Japan
Rear ball bearing: 14x25,4x6 Swiss made ceramic
Carburetor diameter [mm]: 7.0 stock (6.0, 6.5, 7.5 and 8.0 optional)
Carburetor: VCX2-A aluminum, 2 needles, GEN2
Weight [g]: 345
Fuel consumption: >9:00 min
Engine temperature: 110-130Ð’Â°C (depending on air temperature)
Recommended Glow plug: REDS TS3
Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe
Recommended fuel: 25-30% nitro, 8-10% oil
Break-in fuel: 12% oil
Add a Pre Break-In service by Marco Rossi, this will add 2/3 days to order processing
Please note: you will need a new manifold or pipe kit for this new engine.
KM210011 - 2143/M Pipe/Header Kit
KX210007 - 2143/M X-One one-piece
CL210004 - M Header only if you have a pipe already